Skip to Content

home • knowledge base • standards & norms • semi

Standards & norms
SEMI.

Q U I C K   L I N K S


●  About Fastmicro ●  Calculator tools ●  Contact us

SEMI

● Standards & norms SEMI

SEMI E195-0925 - Test Method Using Adhesive Replacement Substrates to Assess Particulate Surface Contamination on Critical Chamber Components

Abstract 

 1  Purpose

1.1  This Test Method describes a quantitative analysis method to measure the ISO 14644-9 surface cleanliness for particle concentration (SCP) of a critical chamber component (CCC) by means of an adhesive replacement substrate (ARS), which removes particles from the CCC surfaces of interest. The ARS is subsequently measured with a scanning surface inspection system (SSIS), typically a scatterometer, for particle counting, and with scanning electron microscopy with energy dispersive x-ray spectrometry (SEM/EDX) to identify the elemental composition of the particles. 

1.2  This Test Method is intended to promote communication among the relevant parties (e.g., processing-equipment users, processing-equipment manufacturers, CCC manufacturers, cleaning-service providers, testing laboratories). This Test Method also can be used to facilitate better communication regarding particle-level expectations among the users, processing equipment manufacturers, the CCC manufacturers, and the cleaning-service providers.

1.3  The intended use of this Test Method is to ensure consistency in the measuring and reporting of results provided by each processing-equipment manufacturer or CCC manufacturer.

2  Scope

2.1  This Test Method applies to the measurement of the ISO 14644-9 SCP of a CCC (e.g., showerheads, pedestals, weldments, optical housings) by means of an ARS.


source: SEMI.org