home • warranty conditions
Warranty conditions.
Fastmicro Warranty Conditions
PRODUCT WARRANTY
FASTMICRO warrants that, during a period of 12 months from delivery of a Product to the purchaser thereof (“Buyer”), such Product shall meet the specifications published for such Product by FASTMICRO and be free from defects in material and workmanship, provided that the Product is handled, stored, installed, applied, used and maintained in accordance with FASTMICRO’s instructions, manuals and other guidelines provided by or on behalf of FASTMICRO (the “Product Warranty”).
2. DEFINITIONS
The following terms shall have the following meaning:
“Contract” means any agreement for the sale and purchase of Products, resulting from (a) Buyer’s Order and FASTMICRO’s Order Confirmation or (b) a written contract executed by FASTMICRO and Buyer or (c) proposed by one Party and accepted by the other Party in writing including by exchange of correspondence or email or other forms of written communication.
“Buyer” means the legal entity specified in the Contract as the purchasing Party.
“FASTMICRO” means the FastMicro entity specified in the Contract as the supplying Party.
“Party” means each of FASTMICRO and Buyer and “Parties” means FASTMICRO and Buyer.
"Product" means FASTMICRO’s products specified in the Contract.
Remedies
Any breach of the Product Warranty shall exclusively be dealt with in accordance with Section 6.2 of FASTMICRO’s General Terms and Conditions of Sale.
Exclusions
The warranties specified in these Warranty Conditions do not cover any defects resulting from or attributable to (i) normal wear and tear, (ii) misuse, abuse, neglect, vandalism or accident, (iii) the use of dirty or faulty samplers, (iii) power failure, electrical spikes or surges, lighting, flood, fire, accidental breakage or other events outside the control of FASTMICRO.
FASTMICRO shall in its sole discretion determine whether it is willing to correct defects that are not or no longer covered by the Product Warranty. If FASTMICRO determines to do so, corrective work shall be performed on the basis of a separate purchase order at FASTMICRO’s then current standard rates.
Transfer
This warranty is extended to the original Buyer of the Products only.
Obtaining Warranty Performance
In order to obtain warranty service, FASTMICRO must be promptly notified through its Service Management System (SMS). If Buyer does not yet have access to the SMS, warranty service can be obtained by sending a request for service to service@fast-micro.com. Together with the notification, the complete serial number printed on the Product and the shipment date of the Product must be provided.
Communication with FASTMICRO for the warranty service shall only be done by a certified Supervisor through the SMS, to ensure that a service request is clearly registered, followed and closed. A list of trained and qualified Supervisors at the customer site will be kept up to date by FASTMICRO in the SMS. Supervisors must be trained and have received a certificate from FASTMICRO to be listed as qualified. A training of maximum 4 Users (different levels) is included at first installation of the Product. Any foreseen changes in Supervisors shall be communicated with FASTMICRO to organize a new training. Operators do not need to be trained by FASTMICRO but can also be trained by qualified Supervisors in the normal operation of the system.
FASTMICRO shall use its best efforts to respond to each request for warranty service within two (2) business days. A faster response is possible if Parties have separately entered into an agreement for remote support.
If FASTMICRO agrees that Products must be returned for inspection, repair or replacement by FASTMICRO, FASTMICRO will issue a Return Merchandise Authorization (RMA). FASTMICRO will not accept a return of any Products without a RMA.