Fastmicro

Sampler

Fastmicro surface Particle Contamination Sampler

The Fastmicro Sampler is a surface particle contamination inspection solution for indirect measurements of particle count, size and location down to 0.5 micrometer particles. These 'tape-lift' samplers enable flexible sampling on a variety of surfaces, including those that are difficult to reach or are unusually rough, without leaving any measurable residue. The sampler is packaged in a cleanroom clean storage container.

ORDER NOW

Fastmicro Particle Contamination Sampler

Fastmicro Sampler for indirect surface particle counting, for qualification, monitoring and analysis

Consistency and cleanliness in sampling by the operator using the Fastmicro Sampler and Sampling tool
Bigger Sampling surface area of 22 mm in diameter (2,7x more statistical relevance)
Particle sampling and detection from 0.5 µm size PSL equivalent particles
>90% Pick-up efficiency | >90% Repeatability | Leave no measurable residue
More efficient cost-per-measurement

Fastmicro Particle Contamination Sampler with reference Marker

Fastmicro Sampler with location reference Markers enabling deeper post analysis for contamination root-cause analysis.

Enables post-analysis with increased throughput
Reduces cost per measurement on particle characterization analysis equipment

Fastmicro Sampler SEM stub

Stub Sampler holder for follow up analysis like on a SEM and usable as particle trap holder for sticky particle deposition collection.

SEM stub analysis interface
Sticky particle trap

Fastmicro Sampler

Surface particle measurement at microscale.

Submicron Particle Sampling

The Fastmicro Sampler is a surface particle contamination inspection tool for indirect measurements of particle count, size and location down to 0.5 micrometer particles. These 'tape-lift' samplers enable flexible sampling on a variety of surfaces, including those that are difficult to reach or are unusually rough, without leaving any measurable residue.

The versatility makes the sampler suitable to test diverse situations across various industries, providing robust measurements and valuable insights into contamination levels

Request Datasheet

Request Now

Order Price

Fastmicro Particle Contamination sampler: 14,75 Euro p/pcs
Fastmicro Particle Contamination sampler with reference Marker: 24,75 Euro p/pcs
Sampler stub upgrade: 265 Euro p/pcs; ex works

Minimum Order Quantity

The Fastmicro Sampler minimum order quantities is 6 pieces. If you buy many at once, we will deliver to all customers first 24 pieces, following by availability.

How to order and Delivery Time

We now take pre-orders for delivery in 2025 on a first come first served basis. Payment at delivery

Can I the try-out the Fastmicro Sampler first?

You can visit us at our cleanroom demo center and have a first-hand experience
In special cases we can support on site demo
In special cases we can sent an operator tool with samplers to try & return

Start with the customer – find out what they want and give it to them.

How to enable the Fastmicro Sample Scanner for the Sampler?

To use the Fastmicro Particle Contamination Sampler with the Fastmicro Sample Scanner (SAS) you require a dedicated Fastmicro Sampler Interface and Recipe installed on the Scanner.

If you already have a Fastmicro Sample Scanner, it can be upgraded with the Sampler Interface and Recipe to secure operation; With the Sampler lower cost-per-measurement, ROI payback is expected within a usage of 200 pieces.

If you want to use the Fastmicro Sampler with reference Markers for follow-up particle characterization and contamination root-cause analysis, you need to buy the Sampler stub and install the Sample Scanner option: Workflow and Reporting Upgrade, which enables the reference marker output.

Contact Sales for to upgrade your existing Fastmicro Sample Scanner or buy a new Sampler Scanner with Sampler Interface as a set with discounted pricing.

Request a Quote